How to Set Up Wavlink QUANTUM S4 WiFi Router?

Setting up a new WiFi router is a bit tricky. But in fact, setting up any WiFi router is easy. This guide will help you set up your Wavlink QUANTUM S4 WiFi router easily. Through this guide, you will learn how to connect your router, log in via 192.168.10.1, and complete the Wavlink setup. You don’t need special skills; you just need to follow every step properly. Follow these steps:

Step 1: Unbox and Connect Everything

Start by unboxing your Wavlink QUANTUM S4 WiFi router. Inside the box, you should find

• A power adapter
• An Ethernet cable
• A user manual

Now, connect it:

• Attach an Ethernet cable to your modem and the router’s WAN port.
• Use the power adapter and turn on the router.
• Wait until the LED lights turn stable.

Step 2: Connect to the WiFi

After the router is powered on:

• Find the default WiFi network name on the label at the back or bottom of the router.
• Use your computer or other device to connect to that WiFi network.
• Enter the default password, also found on the label.

Once you are connected to the WiFi, you can now move to the next step.

Step 3: Open 192.168.10.1

Access the web interface of the Wavlink router to complete setup: 

• Open any updated web browser.
• In the address bar, type 192.168.10.1 and press Enter.
• You will see the Wavlink login page.

If due to any reason, IP 192.168.10.1, double-check your WiFi connection.

Step 4: Log In to the Router

When the login page appears:

• Enter the username and password; the default for both is usually “admin”.
• Click “Login” or “Sign In”.
• You will now see the main Wavlink setup page.

Step 5: Complete the Wavlink Setup Wizard

The setup wizard will guide you through the process:

Select Internet Connection Type:

• Choose “DHCP” if you are unsure. It works with most ISPs.

Set WiFi Name and Password:

• Create a new network name (SSID).
• Set a strong WiFi password for better security.

Save Settings:

• After entering the details, click “Save” or “Apply”.
• The router will reboot.

Step 6: Reconnect and Enjoy

After the router restarts:

• Find your new WiFi network name.
• Enter the new password you created.
• Connect all your devices to the router. 

Now your Wavlink QUANTUM S4 WiFi router is ready to deliver fast, stable internet!

Tips for the Best Performance

Put it in the center of your home for the best coverage.

• After the setup, change your router’s admin password to make it secure.
• Log in once in a while to check for Firmware updates.
• You can use any of the 5 GHz band or the 2.4 GHz band.

Troubleshooting Tips

If you are facing issues during the setup of the Wavlink QUANTUM S4 WiFi Router, then you need to take the troubleshooting tips given below; 

• Make sure you are connected to the router’s WiFi.
• Restart your router and try again.
• Reset the router by holding the reset button for 10 seconds, then redo the setup.
• Move the router to a higher, open place.
• Disconnect devices you’re not using.

Conclusion

Complete the Wavlink QUANTUM S4 WiFi Router by following the above setup guide. Above, we provide detailed instructions, from connecting your router to power to accessing the internet. Always protect your network with a strong password and keep your router updated for the best performance.